Two turmeric extract quotes land on the same desk. One is $14 per kilogram. The other is $23. The first quote looks like the easy choice until you open the specification sheets and find that the two prices describe different products.
Price per kilogram is a poor comparison for a standardized botanical. The useful number is the cost of the active you actually need in the finished product.
First, put both quotes on the same basis
Check the total curcuminoid content. A 95% extract and a 10% extract do not belong in the same price column. Convert both to cost per kilogram of curcuminoids, then calculate the amount needed for one serving.
Example. A 95% extract with a $23/kg price contains 950 g of curcuminoids. That is about $2.42 per 100 g of actives. A 10% extract at $14/kg contains 100 g of curcuminoids, which is about $14 per 100 g. The lower price per bag is not the lower cost per dose.
Do the same with the finished serving. If a capsule needs 500 mg of curcuminoids, it takes about 526 mg of 95% powder or 5 g of 10% powder. The second option is not a realistic capsule.
Read the curcuminoid breakdown
Total curcuminoids is the starting point, not the whole specification. Ask for curcumin, demethoxycurcumin and bisdemethoxycurcumin separately. The ratio affects the colour, the analytical profile and the way the material matches your existing formula.
A supplier who only prints one total may still have a good product. But you cannot compare it properly until the breakdown is visible.
Ask what is in the other 5%
The headline number tells you the active content. It does not tell you whether the batch carries residual solvent or fails a heavy-metal limit. Turmeric extraction is not a simple grinding step. Solvent choice, purification and drying all affect what remains in the powder.
The minimum document set should include residual solvents, heavy metals, pesticides and microbiology. If the product is going into the EU or the US, ask for the limits and the method, not just a pass or fail line.
Check the form before the price
A conventional powder, a water-soluble grade and a phospholipid complex solve different problems. A conventional 95% powder is fine for many capsules. A clear beverage usually needs a water-soluble grade. A premium capsule may use a phospholipid complex.
Do not compare a standard powder quote with a water-soluble quote. They are not the same product, and the higher price may be doing a different job.
Put the sample through the real process
Paper specifications do not show how the powder behaves on your line. Ask for a sample from the production lot, then test the things that affect yield and appearance.
- Colour and batch-to-batch consistency.
- Particle size, flow and blending behaviour.
- Dispersion or sediment in the intended liquid.
- Taste, odour and colour in the finished matrix.
- Assay after processing, if the product is heated or stored.
A sample that looks perfect in a bag but bridges in the hopper is not a good sample.
Five red flags in a turmeric quote
- The COA has no batch number, production date or analytical method.
- The supplier says HPLC in the email and UV on the document.
- The total curcuminoid figure is given without the individual breakdown.
- Residual solvent and heavy-metal results are missing or copied from a different product.
- The price changes once you ask for a sample, a COA and a 25 kg drum.
None of these automatically means the material is bad. They mean the quote is incomplete, and incomplete quotes are expensive to fix after the purchase order is signed.
A short RFQ that gets useful answers
Ask for the specification, a batch COA, the curcuminoid breakdown, the grade, the packaging, the MOQ and the lead time in one message. Add the destination market and the dosage form. A supplier who understands the application will answer the technical questions without turning the reply into a catalogue.
Then ask for a sample and compare it against the specification, not against the sales deck.
Questions buyers ask
Is the cheapest price per kilogram ever the right choice?
It can be, if the specification is identical and the documents are complete. The problem starts when the lower price comes from a lower assay, a different grade or a shorter test panel. Normalize the active content and the test package before comparing the numbers.
Should I ask for one COA or several batches?
Ask for three recent batches if the supplier has them. One clean COA proves one batch was clean. Three batches tell you whether the process is under control.
What is the fastest way to screen a new supplier?
Send a short RFQ with the grade, application, destination market, annual volume and required documents. A supplier who cannot answer the technical points clearly at the quotation stage will usually be harder to manage after the order.
Related reading: turmeric extract 95% vs 10% and when a water-soluble grade is worth the extra cost.
View the Curcumin Extract 95% page or send the application details to get a specification matched to your format.

Is it reasonable to ask for three recent batch COAs, or will suppliers see that as too much?
Three is reasonable for a new supplier. One clean batch proves little about process control. Compare the same fields across all three and ask why any result moved.
A quotation came with a COA that only gives total curcuminoids. What should we ask for before approving the sample?
Ask for the individual curcuminoid breakdown, the HPLC method and the batch number the COA belongs to. For export, add residual solvents and heavy metals to the request.