
Water-Soluble Curcumin Powder (10% / 20% CWD)
A spray-dried curcumin emulsion that disperses in cold water without an emulsifier in your own plant. Supplied at 10% and 20% curcuminoids for ready-to-drink beverages, shots, stick packs and gummies.
- Active: Curcuminoids 10% or 20% (HPLC)
- Form: Free-flowing yellow-orange powder
- Dispersion: Cold water, 0.1% w/w, no visible sediment
- Packaging: 20 kg fibre drum with double PE liner
What “Water-Soluble” Means on a Spec Sheet
Curcumin itself does not dissolve in water. What dissolves is an engineered emulsion: curcumin is dissolved in a food-grade carrier with an emulsifier, homogenized, and spray-dried into a powder. When the powder hits water, the emulsion re-forms and the curcumin stays suspended as sub-micron droplets.
This is why two suppliers can both sell “water-soluble curcumin” and behave differently in your drink. The variable is droplet size and carrier choice, not the word on the label. A coarse emulsion gives an opaque, sedimenting drink; a fine one gives a translucent, stable dispersion. Ask for a dispersion test at your use level, and ask what happens after 24 hours at room temperature.
Key Facts at a Glance
- Curcuminoids: 10% or 20% (HPLC), other loads on request
- Carrier: Gum arabic or modified starch, declared on the COA
- Appearance: Yellow-orange powder, free-flowing
- Dispersion: 0.1% w/w in water at 20 °C, no visible sediment after 2 h
- pH range: tested 3.0–7.0
- Heat stability: 85 °C for 30 minutes, colour and assay checked
- Packaging: 20 kg drum; 5 kg trial pack available
- Shelf life: 18–24 months sealed, below 25 °C
Where It Fits
- Ready-to-drink beverages. The main use. A 250 ml serving at 200 mg of a 10% grade adds 2 g of powder and stays visually clean.
- Shots and concentrates. High solids, low pH; check for ringing at the bottle shoulder over shelf life.
- Stick packs and instant powders. Dry blending is straightforward; the powder must not clump in the sachet.
- Gummies. Adds colour as well as active, so the pectin or gelatin base can drop separate colourants.
- Effervescent tablets. The acid system is aggressive; test the specific grade rather than assuming.
Specify These Tests, Not Just the Percentage
Four checks separate a workable grade from a problematic one. Ask for each of them against your own matrix:
- Dispersion at use level. Not 1% in the supplier’s lab water — your concentration, your water hardness, your pH.
- Turbidity or absorbance. A number you can compare between suppliers, measured the same way.
- Sediment after 24 h. Visual and gravimetric. This predicts the complaint you will get from consumers.
- Heat and light stability. Curcumin is light-sensitive; a pasteurization step and three months on a shelf are different tests.
MOQ
- Sample: 500 g (freight collect)
- Bulk: from 20 kg
- Tiers: 100 kg / 500 kg / 1 t — tiered pricing on request
FOB Price
- Ports: Xi’an / Shanghai, China
- Indicative: USD 22–38 / kg (FOB, 10–20%)
- Sea freight & insurance not included
Lead Time
- Standard: 20–35 days
- Expedited: 10–15 days (stocked loads)
- Counted from: specification approval + deposit
Indicative FOB ranges. Carrier system and curcuminoid load drive the price — submit the inquiry form for a formal quotation.
FAQ
Is it clear when dissolved?
Translucent at 0.1% with a fine emulsion, not water-clear like a dye. If your product needs to look like a clear soft drink, test a sample in the actual base — and expect a light haze.
Does it improve bioavailability?
Dispersing curcumin in water improves the rate of dissolution, and several studies link finer emulsions to higher exposure. We do not make pharmacokinetic claims for the ingredient; the brand’s own substantiation is what counts on pack.
What is the difference between 10% and 20%?
Only the active load and the amount of carrier. The 20% grade halves the powder weight for the same curcuminoid dose, which matters in small formats like shots; the 10% grade disperses more easily and costs less per kilogram.
Can it be used in a protein shake?
Yes, but protein and minerals can destabilize the emulsion. Send us the base composition and we will advise on the grade and the order of addition.
Related Reading
- Water-soluble curcumin: when the extra cost pays back
- Curcumin extract 95%, the capsule-grade powder.
- Turmeric oleoresin, for oil-based systems.
