Alpha-Arbutin 20% Solution: A Buyer’s Guide to Dosing and Grade

Alpha-arbutin is quoted as a 20% aqueous solution, and that one number decides both the dose and the cost. A formulator who reads “20%” as “20% powder” will under-dose by a factor of five, and a buyer who compares a solution price against a powder price is comparing two different materials. This note covers the grade we supply, how the dilution works, and what to verify before a sample is approved.

Core Nutrix supplies alpha-arbutin 20% aqueous solution (CAS 84380-01-8), cosmetic grade, packed in 25 kg drums.

Solution, Not Powder

  • Active content: 20% alpha-arbutin in water, colorless to pale yellow.
  • Dosing: the material is weighed into the water phase like any other liquid ingredient, with no dispersion step.
  • Handling: a liquid avoids the dust and weighing error that come with a high-purity powder dosed at 1% or less.
  • Verification: every batch is checked by HPLC, and cosmetic-grade documentation ships with the lot.

The Dilution Arithmetic

Use level in the finished product runs 0.5-2% alpha-arbutin. At 20% active content, the amount of solution needed is the target divided by 0.20:

Target active in formula Solution needed Per 100 kg batch
0.5% 2.5% 2.5 kg
1.0% 5.0% 5.0 kg
2.0% 10.0% 10.0 kg

A 5% addition of the solution gives a 1% active formula. That ratio is the quickest way to check a quote: divide the price per kilogram of solution by 0.20 to get the cost per kilogram of active, then compare on that basis.

Alpha and Beta Are Different Materials

  • Both are glycosylated hydroquinone derivatives, but the alpha anomer is the more stable of the two in formulation.
  • Our material is produced by enzymatic glycosylation, which yields the alpha anomer with high stereospecificity — that step is what defines the stability profile.
  • If a quotation does not state which anomer is supplied, or supplies a blend, the price is not comparable to a defined alpha grade.

Stability and pH Window

  • Best performance is in the pH 5-7 range.
  • Strongly acidic systems should be stability-tested before scale-up rather than assumed.
  • A 20% aqueous solution needs a preservation plan; preservative-compatibility data ships with each batch so the system can be matched to the formula.
  • Appearance is a fast incoming check: colorless to pale yellow, with a dark or brown tint signalling oxidation.

What Buyers Should Check

  1. Assay basis. Confirm 20% active in solution and that the COA reports it by HPLC, not by calculation.
  2. Anomer. Alpha, stated explicitly, rather than a beta blend or an unspecified glycoside.
  3. Appearance and colour. Colorless to pale yellow on receipt; reject dark lots.
  4. Microbial control. Ask which preservative system is used and request the micro panel per batch.
  5. Document set. COA, MSDS and preservative-compatibility data with the shipment.
  6. Regulatory limit. Confirm the finished-product limit that applies in your market before the label is finalised.

Packaging, Shelf Life and Order Size

  • Packaging: 25 kg drum, with custom formats available.
  • Shelf life: 24 months sealed, stored cool and dry.
  • Order size: samples from 1 kg (freight collect), bulk from 25 kg, with tier pricing from 100 kg.

FAQ

Is it supplied as a powder or a liquid?

As a ready-to-use 20% aqueous solution. That simplifies dosing into water-based formulas and removes a dispersion step.

What is the difference from beta-arbutin?

Alpha-arbutin is the alpha anomer, produced here by enzymatic glycosylation, and it is the more stable of the two in formulation. Ask for the anomer to be stated on the specification.

Can it be used in a low-pH formula?

It performs best between pH 5 and 7. Strongly acidic systems should be stability-tested with the actual base before scale-up.

What documents ship with a batch?

A batch COA with the HPLC assay, the MSDS, and preservative-compatibility data. Third-party testing is available on request.

Core Nutrix Perspective

We quote alpha-arbutin on an active basis so the comparison against a powder or another solution is honest. Send the target percentage in the finished formula and the batch size, and the amount of solution per batch follows from the arithmetic above. If the formula sits outside pH 5-7, say so before sampling, because that changes what the stability work needs to cover.

View Alpha-Arbutin
Request Free Samples
Contact Us

Scroll to Top